Table of Contents
Advertisement
INSTALLATION
16) Install cap over terminal with 4 screws.
Note: Cap may be painted to match building color.
17) Secure fi restop in place with 4 screws (see step 2).
18) Seal the outer frame with sealant to prevent any water from entering
the building envelope.
Caution: Label all wires prior to disconnection when
servicing controls.
Wiring errors can cause improper and dangerous
22
operation.
PIPE CONNECTION FROM TERMINAL
TO UNIT
1)
Install 8" slip section of pipe over fi nal length of rigid pipe.
3)
Connect 8" Slip to Power vent terminal - adjust slip section for fi t.
Secure slip section with screws when optimal fi t is achieved.
Regency Horizon™ HZ42STEPV Gas Fireplace
Slip section
Adjust to fi t
Advertisement
Table of Contents
