Innovative Hearth Products
Superior
DRT/C3000 Series Direct-Vent Gas Fireplaces
TM
Step 1. Slide top trim pieces over flange of panel until seated squarely.
NOTE: Remove protective flim from all stainless components
before installation.
Installing Facade
Step 2. Slide side trim pieces into place (top will overlap slightly). Repeat
Step 1 and Step 2 for bottom and opposite side trim for panel.
Step 3. Plug lead wires into the IPI/CPI Switch on right side of
facade base.
Installation
900285-00 05/2015
45