Smb Setup - Xerox DocuColor 4 Administrator's Manual

2.6 Network Services Setup
PRINT SERVER
[LIST]
Use the up and down arrow buttons to scroll through the list of print servers
defined for the selected file server. After selecting a print server, press Item/
Enter. If a password is required to log in, the PSERVER PASSWORD screen
is displayed.
2
PSERVER PASSWORD
Use the arrow buttons to enter the password. Press Item/Enter to accept the
password. If fewer than eight file servers are connected, the ANOTHER FS?
screen is displayed. If the maximum number of file servers are connected,
the POLL INT (SEC) screen is displayed.
ANOTHER FS?
YES/NO [YES]
Select YES to redisplay a list of available servers you may connect to. Select
NO to stop adding file servers and display the POLLING INT screen. You
can connect the printer to a maximum of eight Novell files servers at once.
Polling interval
POLL INT (SEC)
1-999 [15]
Use the up and down arrow buttons to specify the interval, in seconds, at
which the printer communicates with the Novell server.
If you select a short interval, the amount of network traffic increases; this
may slow down other network jobs.
2.6.3

SMB Setup

Server Message Block (SMB) is a point-to-point file sharing and printing
protocol, and the default printing method of most Windows applications.
SMB runs on top of TCP/IP and does not require IPX. When file and printer
sharing for Microsoft clients is enabled, SMB can be run on Windows 95/98
and Windows NT.
For information on setting up SMB printing from your computer, see the
User Guide.
40