Printer Setup - Xerox DocuColor 4 Administrator's Manual

2.3 Setting up the printer/copier
VERIFY PASSWORD
To verify a new or existing password, you must enter the password again. If
you make a mistake, you will be prompted to enter the password again. Note
that the scanner has its own Administrator password independent of the
printer.
2
The Copier and Printer have separate passwords. Refer to section 5.4 and
5.5 to set the copier password for user and system administrator.
2.3.4

Printer Setup

The Printer Setup options set the printer's page description language (PDL),
paper size, and specify the ability to print under low Dry Ink conditions.
PRINTER SETUP
To advance to the PAGE DESC LANG screen, press Item/Enter.
PAGE DESC LANG
PS/PCL/AUTO [AUTO]
Use this option to select a default page description language for your printer.
If you select AUTO, the printer will automatically detect and interpret the
page description language used by the file.
DEFAULT PAPER
LETTER/A4 [A4]
Use this option to specify the default paper size to print on. Information pages
from the PRINT PAGES FROM LIST menu (Menu Help, Configuration page,
Test Pattern, PS or PCL Font list, Job Log and Test page) are printed on the
default paper size set here.
DRY INK LOW
CONTINUE/STOP [CONTINUE]
Use this option to specify the behavior of the printer/copier when Dry Ink in
a cartridge is low. Select CONTINUE to print even when Dry Ink is low;
select STOP to stop printing when the Dry Ink is low. If Stop is selected and
a print job is sent while Dry Ink is low, the printer/copier error light flashed.
When the Dry Ink has been replaced, the job is printed.
Replace Dry Ink soon after the Dry Ink Low/Replace [Dry Ink color] mes-
sage appears.
26