Installing A Token Ring Card - Xerox DocuColor 4 Administrator's Manual

B.4 Installing a Token Ring Network Card
The following section explains how to install a Token Ring network card on
the DocuColor 4 VP video controller board.
To install the Token Ring board you will need to:
• Access the video controller board.
• Install the Token Ring board.
• Reassemble the printer.
• Configure the printer's network Setup.
• Do not drop or bend the Token Ring board.
• Do not touch the connector edge of the Token Ring board.
• Protect the Token Ring board from static electricity by keeping it in its
anti-static package until you are ready to install it.
• Avoid exposing the Token Ring board to direct sunlight, high tempera-
tures, or humidity.
A
133