Setting The Netware 4.X Bindery Context - Xerox DocuColor 4 Administrator's Manual

For more information about setting up the printer/copier using
WebSetup, see page 46.
Completing the setup on the DocuColor 4 LP/CP:
In the I/O PORT SETUP screens, enable the port you will use for printing
to the DocuColor 4 LP/CP.
In the NETWORK PROTOCOL SETUP screens, configure the protocols
you will use.
In the ENABLE NOVELL screens, select the frame type(s) that will be
used between the NetWare server(s) and the DocuColor 4 LP/CP.
In the NETWORK SERVICES SETUP screens, select YES in the
ENABLE PSERVER screen, and select YES in the ENABLE NDS screen.
Identify the NDS tree on which the printer, print server, and print queue
have been defined.
Select the user login object.
Identify the defined print server.
Finally browse to container object that contains the print queue or queues.
4.3.3

Setting the NetWare 4.x bindery context

You can connect only one directory tree to the DocuColor 4 LP/CP. If you
need to connect additional NetWare 4.x servers, you can do so by using bind-
ery emulation, which causes the 4.x server to behave like and be accepted as
a NetWare 3.x server.
The file server selected must not be in the same tree as that selected in NDS
Setup.
4.3 Configuring a NetWare server for printing
4
79