Device Operation Modes; Access Point Mode; Router Mode - D-Link DAP-1150 User Manual

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
When you keep the button pushed for more than 8 seconds, the access point switches to
!
crash recovery mode. To restore normal operation of the access point, please, contact the
Technical Support Service.
When you have configured all needed settings, click the Logout line.

Device Operation Modes

Access Point Mode

In the access point mode, the device is used to create a wireless local area network or to connect to
a wired router.

Router Mode

In the router mode, the device is used to connect devices equipped with a wireless interface to the
Internet. You can connect the device to a cable or DSL modem or to a private Ethernet line and
create a WAN connection. In addition, you can configure connection to a Wireless Internet Service
Provider.
!
When the device is switched to the router mode, the LAN port is used as the WAN port,
therefore you cannot connect to it via a wired connection.
Page 30 of 175
Installation and Connection