Back Panel - D-Link DAP-1150 User Manual

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual

Back Panel

Port
LAN
5V=1.2A
RESET
The device is equipped with a detachable antenna (Reverse SMA).
Figure 2. Back panel view.
Access point mode: an Ethernet port to connect to a computer.
Router mode: an Ethernet port to connect to a cable or DSL modem
or to a private Ethernet line
included in the delivery package).
Power connector.
A button to restore the factory default settings.
Power off the device. Push the RESET button. Power on the device
keeping the RESET button pushed, and after 5 seconds release the
button.
Page 11 of 175
Description
(it is recommended to use the cable
Overview