D-Link DAP-1150 User Manual page 155

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Figure 136. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
IP address
Mask
Protocol
Public port
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
A host or a subnet to which the rule is applied.
The mask of the subnet.
The protocol available for remote management of the access point.
An external port of the access point. You can specify only one port.
Page 155 of 175
Configuring Device (Router Mode)
Description