D-Link DAP-1150 User Manual page 114

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Parameter
MAC
Figure 104. The page for creating a new connection. The IP and Miscellaneous sections.
Parameter
IP Address
Netmask
Gateway IP Address
Primary DNS server/
Secondary DNS server
Enable RIP
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC button to set the MAC address of
the network interface card (of the computer that is being used to
configure the access point at the moment) as the MAC address of
the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list located to the right of the field (the field
will be filled in automatically).
IP
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Page 114 of 175
Configuring Device (Router Mode)
Description
Description