Configuration - D-Link DAP-1150 User Manual

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual

Configuration

On the System / Configuration page, you can save the changed settings to the non-volatile
memory, restore the factory defaults, backup the current configuration, or restore the device's
configuration from a previously created file.
The following buttons are available on the page:
Control
Save
Factory
Backup
Restore
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the System caption.
3 The name of the button depends upon the web browser that you use.
Figure 149. The System / Configuration page.
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Saving and Restoring Settings section, page 29).
Click the button and follow the dialog box appeared to save the
configuration (all settings of the access point) to your PC.
Click the button to upload a previously saved configuration (all
settings of the access point) from a file on your PC. Click the
Choose/Browse
configuration file located on your PC.
Page 167 of 175
Description
3
button to select
Configuring Device (Router Mode)
a previously saved