D-Link DAP-1150 User Manual page 121

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Parameter
Encryption
Authentication
algorithm
MTU
Keep Alive
Extra options
Dial on demand
PPP debug
IP received
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit
•
key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MSCHAP,
MACHAPv2, or
Authentication algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the access point to
connected to your ISP even when the connection has been inactive
for a specified period of time. When the checkbox is selected, the
LCP interval and LCP fails fields are available. Specify the
required values.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Select the checkbox if you want the access point to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Select the checkbox if you want to log
debugging.
The IP address assigned by the ISP.
Page 121 of 175
Configuring Device (Router Mode)
Description
AUTO value is
all data on PPP connection
selected from the
keep you