D-Link DAP-1150 User Manual page 75

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Parameter
Keep Alive
Dial on demand
PPP IP extension
Use Static IP Address
PPP debug
PPPoE pass through
Click the Next button to continue.
Select the checkbox if you want the access point to
connected to your ISP even when the connection has been inactive
for a specified period of time. When the checkbox is selected, the
LCP interval and LCP fails fields are available. Specify the
required values.
Select the checkbox if you want the access point to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Select the checkbox if you want to use a static IP address to access
the Internet. In the IP Address field displayed when the checkbox
is selected, specify a static IP address.
Select the checkbox if you want to log
debugging.
Select the checkbox if you want to allow PPPoE clients of
computers from your LAN to connect to the Internet through this
PPPoE connection of the access point.
Page 75 of 175
Configuring Device (Router Mode)
Description
all data on PPP connection
keep you