D-Link DAP-1150 User Manual page 145

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
To configure the access point as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
SSID
BSSID
Network Authentication
Figure 127. The page for configuring the client mode.
The name of the network to which the access point connects.
The unique identifier of the network to which the access point
connects.
The authentication type of the network to which the access point
connects.
Page 145 of 175
Configuring Device (Router Mode)
Description