D-Link DAP-1150 User Manual page 133

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Enter an address in the MAC address field of the MAC address adding section and click the
Add button.
To add the MAC address of a device connected to the access point's LAN at the moment, select the
value containing the MAC and IP address of this device from the drop-down list located to the right
of the MAC address field (the field will be filled in automatically) and click the Add button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the right
of the relevant MAC address in the MAC address list section and click the Delete button.
Figure 120. The tab for adding a MAC address.
Page 133 of 175
Configuring Device (Router Mode)