D-Link DAP-1150 User Manual page 124

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
In the DHCP server section, you can configure the built-in DHCP sever of the access point.
Parameter
Mode
Start IP
End IP
Lease time
External DHCP server IP
When all needed settings are configured, click the Save button.
Figure 111. The section for configuring the DHCP server.
An operating mode of the access point's DHCP server.
Enable: the access point assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the Start IP, End IP, and the Lease time
fields are displayed on the page.
Disable: the access point's DHCP server is disabled, clients' IP
addresses are assigned manually.
Relay: an external DHCP server is used to assign IP addresses to
clients. When this value is selected, the External DHCP server IP
field is displayed on the page.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
Page 124 of 175
Configuring Device (Router Mode)
Description