D-Link DAP-1150 User Manual page 28

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
From the system statistics page you can proceed to the page for upgrading the access point's
firmware, contact the technical support group, and proceed to the settings of the local interface or
the device's WLAN.
To upgrade the firmware of the access point, left-click the current firmware version (the right
column of the Firmware version line). After clicking the line, the System / Firmware
upgrade page opens (see the Firmware Upgrade section, page 69).
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the access point's local interface parameters, left-click the IP or MAC address of the local
interface (the right column of the LAN IP line or LAN MAC line correspondingly). After clicking
the line, the page for editing the LAN interface opens (see the LAN section, page 39).
To configure the access point's WLAN parameters, left-click the SSID of the WLAN (the right
column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (see the
Basic Settings section, page 42).
The web-based interface of the access point is multilingual. Select a needed language from the
menu displayed when the mouse pointer is over the Language caption. You can change the
language of the web-based interface in any menu item.
After selecting the language, the notification on unsaved changes will be displayed. Click the Save
button to save the current language of the web-based interface as the default language.
Figure 20. The system statistics page.
Figure 21. Changing the language of the web-based interface.
Page 28 of 175
Installation and Connection