D-Link DAP-1150 User Manual page 78

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Also you can set the address of a device connected to the access point's LAN at the moment. To do
this, select the relevant value from the drop-down list located to the right of the field (the field will
be filled in automatically).
Fill in the IP address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server and Secondary DNS server fields, enter the addresses of the
primary and secondary DNS servers.
Click the Next button to continue.
If needed, enter the IP addresses of the ISP's local resources.
To add a route, click the Add button or right-click the routing table heading and select the Add line
from the shortcut menu displayed.
Click the Next button to continue.
Figure 69. Configuring Static IP WAN connection.
Page 78 of 175
Configuring Device (Router Mode)