D-Link DAP-1150 User Manual page 76

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
If needed, change the connection settings available in the Miscellaneous section.
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Save button to create the
connection or the Back button to specify other settings.
After clicking the Save button, the quick settings page opens.
Figure 66. Configuring PPPoE WAN connection.
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 76 of 175
Configuring Device (Router Mode)
Description