D-Link DAP-1150 User Manual page 137

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
To add a wireless device via the PIN method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Change button.
3. Select the PIN value from the WPS Method drop-down list.
4. Select the PIN method in the software of the wireless device that you want to connect to the
WLAN of the access point.
5. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
6. Right after that, enter the PIN code specified on the cover of the wireless device or in its
software in the PIN Code field.
7. Click the Connect button in the web-based interface of the access point.
To add a wireless device via the PBC method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Change button.
3. Select the PBC value from the WPS Method drop-down list.
4. Select the PBC method in the software of the wireless device that you want to connect to the
WLAN of the access point.
5. Click the relevant button in the software or on the cover of the wireless device that you want
to connect to the WLAN.
6. Click the Connect button in the web-based interface of the access point.
Page 137 of 175
Configuring Device (Router Mode)