Wi-Fi Setup Wizard - D-Link DAP-1150 User Manual

DAP-1150 Wireless Access Point Supporting Router Mode
User Manual

Wi-Fi Setup Wizard

To specify all needed settings for your wireless network, click the Configure Wi-Fi button.
Figure 86. Common and advanced settings of the wireless LAN.
On the opened page, in the Common settings section, select the Enable Wireless checkbox (if
it was deselected before) to enable Wi-Fi connections.
In the Advanced settings section, you can split your network into several parts. To do this, select
the relevant value (2, 3, or 4) from the MBSSID drop-down list.
Click the Next button to continue.
In the Basic settings section, you can change the basic parameters of your access point's WLAN:
"hide" your wireless network (Hide Access Point), specify a name for the network (SSID),
select your location (Country) and the wireless channel number (Channel), specify the operating
mode (Wireless Mode) and the maximum number of devices connected to the wireless network
(Max Associated Clients).
Click the Next button to continue.
Figure 87. Basic settings of the wireless LAN.
Page 94 of 175
Configuring Device (Router Mode)