Changing The Base; Attaching The Belt Clip; Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Siemens Gigaset SL1 Manual

Preparing to use your phone

Changing the base

If your handset is registered to more than one base, you can set it to a particular base or
to the base that has the best reception (Best Base).
v; s
H/Set Settings
s (select registered base or Best Base)

Attaching the belt clip

Activating/deactivating the handset

To activate: press the 'end call' key a and hold.
To deactivate: press the 'end call' key a again in the idle status and hold.
The handset activates automatically when placed in the charger.

Activating/deactivating the keypad lock

Press the hash key
To deactivate/unlock: press the hash key
The keypad lock deactivates automatically when you receive a call. It re-activates when
the call is finished.
When the keypad lock is active, you cannot even call emergency
i
numbers.
8
; s
OK
Select Base
Push the belt clip onto the back of
the handset until the lugs click into
the recesses on either side of the
handset.
R Ø
and hold (the
;
OK
.
OK
icon appears in the display).
R
again and hold.