Walk And Talk Mode; Prerequisite For The Handsets; Activating Walk And Talk Mode On The Handset; Using Walk And Talk Mode - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Walk and Talk mode

Step
by
This function makes communication between handsets (Gigaset 4000
step
Comfort) possible outside the range of the base. The handsets will not be ac-
cessible for incoming calls in walk and talk mode.
Example:
You are on holiday with friends, and each has a handset with walk and talk
mode activated. This will allow you to communicate with each other free of
charge.

Prerequisite for the handsets

Communication will only function between:
G
handsets that are registered on the same base, with both handsets having
selected, for instance, "Base 1" , see page 19;
or G
handsets that have set "Best Base" as the base selection:
Important: All "other people's" handsets that are also within range and
have had walk and talk mode set with "Best Base" as the base selection will
also be called;
or G
handsets that are not registered:
Important: All "other people's" handsets that are also within range, have
had walk and talk mode set and are not registered on a base will also be
called.
The maximum range between handsets operated in walk and talk mode is 300
Info
metres. The operating time of the handsets will be considerably reduced.

Activating walk and talk mode on the handset

Use [
1.
Select using
2.
3. Select using [OK ]:
Activate walk and talk mode.
The walk and talk mode can be switched off with the display key

Using walk and talk mode

Two handsets are in walk and talk mode:
Calling handset:
Press [Call].
Called handset:
The call is signalled on the display with a message.
[SILENT ] deactivate ringer.
Press
The two handsets are connected.

Night service

Night service allows you to set up time-controlled call forwarding so that calls
are redirected from the office to a private line after business hours, for instance.
Just as in the case of call forwarding to an external destination, with night serv-
ice the only MSNs that can be redirected are those the relevant handset has as
the receive MSN. If night service has already been activated it will have to be
deactivated in order the change the forwarding destination.
|

] to open the menu.
and [OK ]:
Walk and Talk
!
.
Add. Features .
Using several handsets
Off
.
65