First steps
Setting up the charging cradle
The charging cradle is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤
Set up the charging cradle on a flat, non-slip surface or mount it on the wall
¢
(
page 48).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
Connecting the charging cradle
2
To disconnect the plug from the charging
cradle, press the release button
disconnect the plug 2.
8
¢
¤
Connect the flat plug from the power
adapter 1.
1
¤
Plug the power adapter into the plug
socket 2.
and
1
page 35) is activated.
1
2