Cleaning The Exterior Surfaces; Application Version Updates - Datamax I-class Maintenance Manual

2.4.5

Cleaning the Exterior Surfaces

When soiled, clean the outer surfaces of the printer with a general-purpose cleanser. (Never use
abrasive cleansers or solvents.)
1. Turn OFF and unplug the printer.
2. Using a soft cloth or sponge dampened with a general-purpose cleanser to wipe the exterior
surfaces clean.
3. Allow the surfaces to dry.

2.5 Application Version Updates

As available, application program (firmware) updates can
be found at http://www.datamax-oneil.com/
installed.
The update can be performed in Ready Mode or in
Download Mode. Before starting, identify the current
Application Version by printing a Configuration Label.
Compare the Application Version string to those available
from our web site then download the desired file onto
your computer's hard drive and proceed according to the
currently installed version:
If 2.091 or greater, see Section 2.5.1; or,
•
If 2.08 or less, see Section 2.5.2.
•
Note: If updating to version 11.021 or greater, the Boot Loader must be updated before

proceeding; see Section 2.6.
Also, those desiring an alternate menu language must also download the EFIGS menu
language file. Go to the EFIGS directory and copy 832296.01C (or most current version) to
lpt1: /b (where the DOS Copy command requires the /b parameter because this file
contains binary code).
If an error occurs during the download the update will be terminated, and if the
process did not reach ERASING FLASH or UPDATING SOFTWARE, the previous program
will remain intact; otherwise, a successful download must be completed to make the
WARNING
printer operable.
Adjustments and Maintenance
and then
2-21
COMMUNICATIONS
CONFIGURATION
SERIAL PORT A:
TUE 09:09 AM 29JUL2008
BAUD RATE:
PRINTER KEY:
4308-TB10-020312-001 9600 BPS
PROTOCOL:
APPLICATION VERSION:
BOTH
83-2284-11E4 11.054 07/07/2008
PARITY:
MCL Version: 1.20.02-126
NONE
BOOT LOADER:
DATA BITS:
83-2269-11A 11.01 10/02/2007
8
UNLOCKED:
STOP BITS:
*NONE
1
FPGA:
SERIAL PORT B:
*
MACO:
NOT INSTALLED
NOT SET
SERIAL PORT C:
MACR:
NOT INSTALLED
00-90-c9-01-d0-84
SERIAL PORT D:
NOT INSTALLED
SYSTEM INFORMATION
USB PORT:
PRINT BUFFER SIZE:
100 in.
NOT INSTALLED
FLASH SIZE:
PARALLEL PORT A:
2 MB
PORT DIRECTION:
RAM TEST:
UNI-DIRECTIONAL
PASS
PARALLEL PORT A:
OPTIONAL LANGUAGES:
FRANCIAS.DLN
NOT INSTALLED:
ITALIANO.DLN
DEUTSCH.DLN
ESPANOL.DLN
CONFI