Internet Access - Draytek Vigor2130 Series User Manual

3 . 1 . 1 I n t e r n e t
3 . 1 . 1 I n t e r n e t
This page allows you to set WAN configuration with different modes. Use the Connection
Type drop down list to choose one of the WAN modes. The corresponding page will be
displayed.
S t a t i c
S t a t i c
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use Static as the accessing protocol of the internet, please choose Static mode from
Connection Type drop down menu. The following web page will be shown.
IP Address
Subnet Mask
Vigor2130 Series User's Guide
A c c e s s
A c c e s s
Type the IP address.
Type the subnet mask.
33