Ipv6 Lan Setup - Draytek Vigor2130 Series User Manual

4 . 1 0 . 2 I P v 6 L A
4 . 1 0 . 2 I P v 6 L
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
IPv6 Address
IPv6 Link_local Address
Enable Autoconfiguration
Configuration Type
Vigor2130 Series User's Guide
N S e t u p
A N S e t u p
Type static IPv6 address for LAN.
It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC
Address.
Check this box to enable the auto-configuration function
for IPv6 connection.
Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is RADVD(stateless) and the other is
DHCPv6 Server (Stateful).
DHCPv6 Server- DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
IPv6 Start Address/IPv6 End Address- Type the start and
end address for IPv6 server.
185