Draytek Vigor2130 Series User Manual page 119

P P T P / L
P P T P /
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Username
Password
Server Address
WAN IP Network Settings You can choose Static IP or DHCP as WAN IP network setting.
IP Address
Subnet Mask
Primary DNS Server
Secondary DNS Server
Redial Policy
Vigor2130 Series User's Guide
2 T P
L 2 T P
Type in the username provided by ISP in this field.
Type in the password provided by ISP in this field.
Type in the IP address for PPTP /L2TP server.
Type the IP address if you choose Static IP as the WAN IP
network setting.
Type the subnet mask if you chose Static IP as the WAN IP.
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 194.98.0.1 to this
field.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand and
111