Ports Configuration - Draytek Vigor2130 Series User Manual

4 . 4 . 2 P o r t s C o n f
4 . 4 . 2 P o r t s C o n f
This page is used to configure the ACL (Access Control List) parameters for each port. These
parameters will affect data packets received on a port unless the data packets match a specific
ACE (Access Control Entry).
Port
Action
Rate Limiter ID
Counter
Refresh
second). The configuration indicates the permitted packet rate
for unicast, multicast, or broadcast traffic across the switch.
i g u r a t i o n
i g u r a t i o n
There is one WAN port and 4 LAN ports in Vigor2130. Here
each port will be configured with different ID, action, rate
limiter ID, port copy and etc.
Select whether forwarding is permitted ("Allow") or denied
("Deny"). The default value is "Allow".
Select a rate limiter to apply to this port. Available settings
include Disabled, and 1 to 10. The default value is Disabled.
Counts the number of frames that match this Access Control
Entry (ACE).
Click this button to refresh the number of the counter
immediately.
130
Vigor2130 Series User's Guide