Draytek Vigor2130 Series User Manual page 191

T S P C
T S P C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexage
(http://go6.net/4105/register.asp) before you try to use TSPC for network connection. TSPC
would connect to tunnel broker and requests a tunnel according to the specifications inside the
configuration file. It gets a public IPv6 IP address and an IPv6 prefix from the tunnel broker
and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Username
Password
Confirm Password
Tunnel Broker
Tunnel Mode
Vigor2130 Series User's Guide
Type the name obtained from the broker. "vigor2130" is a
default username applied from
http://go6.net/4105/register.asp. It is suggested for you to
apply another username and password.
Type the password assigned with the user name.
Type the password again to make the confirmation.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
IPv6-in-IPv4 Tunnel- Let the broker choose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
183