Installing The Starter Clutch - Orion AGB-21G Service Manual

MAGNETO AND STARTER GEAR
2. Check:
starter clutch operation
a. Hold the starter clutch.
b. When turning the starter clutch gear clock-
wise a , the starter clutch and the starter
clutch gear should engage.
If the starter clutch gear and starter clutch do
not engage, the starter clutch is faulty and
must be replaced.
c. When turning the starter clutch gear counter-
clockwise b , it should turn freely.
If the starter clutch gear does not turn freely,
the starter clutch is faulty and must be re-
placed.
3. Inspect:
dowel pins 1
compression springs 2
spring caps 3
Wear/Damage
4. Inspect:
starter wheel gear
(contacting surface)
Pitting/Wear/Damage

INSTALLING THE STARTER CLUTCH

1. Install:
starter clutch assembly 1
2. Unloosen the starter clutch assembly by us-
ing the center punch.
3. Install:
compression springs 1
spring caps 2
dowel pins 3
4 - 44
Replace.
Replace.
30 Nm (3.0 m kg)