Installing The Camshaft And Rocker Arms; Intake Rocker Arm Shaft 1; Exhaust Rocker Arm Shaft; Intake Rocker Arm - Orion AGB-21G Service Manual

CAMSHAFT /VALVES AND VALVE SPRINGS
4 - 19
6. Calculate:
rocker-arm-to-rocker-arm-shaft clearance
NOTE:
Calculate the clearance by subtracting the rock-
er arm shaft outside diameter from the rocker
arm inside diameter.
Out of specification
part(-s).
Rocker-arm-to-rocker-arm-shaft
clearance
0.005
INSTALLING THE CAMSHAFT AND ROCK-
ER ARMS
1. Lubricate:
rocker arm shaft
Recommended lubricant
Molybdenum disulfide oil
2. Install:

exhaust rocker arm

exhaust rocker arm shaft

NOTE:
Make sure that the exhaust rocker arm shaft is
completely pushed into the cylinder head.
3. Install:

intake rocker arm

intake rocker arm shaft 1

NOTE:
Insert the camshaft into the hole in the cylinder
head and the intake rocker arm shaft as shown .
4. Lubricate:
Camshaft
Recommended lubricant
Camshaft
Molybdenum disulfide oil
Camshaft bearing
Engine oil
Replace the defective
0.035 mm
4
2
3