Rear Brake Adjustment; Pedal Height Adjustment Steps - Orion AGB-21G Service Manual

FRONT BRAKE ADJUSTMENT

REAR BRAKE ADJUSTMENT

NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
reservoir.
WARNING
Check the operation of the brake after
bleeding the brake system.
3. Install:
Diaphragm
Reservoir cap
FRONT BRAKE
1. Check:
Brake lever position A
Brake lever position A :
Standard position
100 mm
REAR BRAKE ADJUSTMENT
1. Check:
Brake pedal height A
Out of specification
Brake pedal height A :
10 mm
2. Adjust:
Brake pedal height

Pedal height adjustment steps:

Loosen the locknut
Turn the adjusting nut
height is within specified height.
Tighten the locknut.
WARNING
Adjust the pedal height between the
maximum and the minimum
After the pedal height adjustment, make
sure that the rear brake does not drag.
3 - 12
Extent of adjustment
Unavailable
Adjust.
.
until the pedal