TRANSMISSION DEVICE,SHIFT DRUM ,GEAR FORKS
CHECKING THE TRANSMISSION
1. Measure:
main axle runout
(with a centering device and dial gauge 1 )
Out of specification
axle.
Main axle runout limit
0.02 mm
2. Measure:
drive axle runout
(with a centering device and dial gauge 1 )
Out of specification
axle.
Drive axle runout limit
0.02 mm
3. Check:
transmission gears
Blue discoloration/pitting/wear
the defective gear(-s).
transmission gear dogs
Cracks/damage/rounded edges
the defective gear(-s).
4. Check:
transmission gear engagement
Incorrect
axle assemblies.
5. Check:
transmission gear movement
Rough movement
part(-s).
6. Check:
circlips
Damage/bends/looseness
4 - 60
Replace the main
Replace the drive
Reassemble the transmission
Replace the defective
Replace.
Replace
Replace