FRONT WHEEL AND REAR WHEEL
REMOVAL POINTS
Rear wheel
1. Remove:
Wheel
NOTE:
Push the wheel forward and remove the drive
chain
.
Wheel bearing (if necessary)
1. Remove:
Bearing
NOTE:
Remove the bearing using a general bearing
puller
.
INSPECTION
Wheel
1. Measure:
Wheel runout
Out of limit → Repair/replace.
Wheel runout limit:
Radial
Lateral
2. Inspect:
Bearing
Rotate inner race with a finger.
Rough spot/seizure → Replace.
NOTE:
Replace the bearings, oil seal and wheel collar
as a set.
5 - 3
: 2.0 mm
: 2.0 mm