Installing The Crankshaft; Assembling The Crankcase - Orion AGB-21G Service Manual

INSTALLING THE CRANKSHAFT

1. Install:
crankshaft 1
CAUTION:
To avoid scratching the crankshaft and to
ease the installation procedure, apply
grease onto the oil seal lips and apply en-
gine oil onto each bearing.

ASSEMBLING THE CRANKCASE

1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Apply:
sealant
(onto the crankcase mating surfaces)
NOTE:
Do not allow any sealant to come into contact
with the oil gallery a .
3. Install:
dowel pins
right crankcase
4. Tighten:
crankcase right half
NOTE:
Tighten the screws in decreasing numerical or-
der (see numbers on the illustration).
4 - 55
CRANKSHAFT
10 Nm (1.0 m kg)