Removing The Cylinder Head - Orion AGB-21G Service Manual

REMOVING THE CYLINDER HEAD

1. Remove:
Long Bolt A
Nut B
2. Align:
"I" mark a on the generator rotor (with the
stationary pointer b on the crankcase cov-
er)
a. Turn the primary pulley counterclockwise.
b. When the piston is at TDC on the compres-
sion stroke, align the "I" mark c on the cam-
shaft sprocket with the mark d on the cylin-
der head.
3. Loosen:
Bolt 1
4. Remove:
Bolt 2
4 - 11
CYLINDER HEAD