Brake Master Cylinder Kit - Orion AGB-21G Service Manual

FRONT WHEEL AND REAR WHEEL

Brake master cylinder kit

1. Clean:
Brake master cylinder
Brake master cylinder kit
Clean them with brake fluid.
2. Install:
Brake master cylinder cup (primary)
Brake master cylinder cup (secondary)
To brake master cylinder piston
NOTE:
Apply the brake fluid on the brake master cyl-
inder cup.
WARNING
After installing, cylinder cup should be
installed as shown direction. Wrong instal-
lation cause improper brake performance.
3. Install:
Spring
To brake master cylinder piston
NOTE:
Install the spring at the smaller dia. side.
4. Install:
[Front]
Brake master cylinder kit
Circlip
Brake master cylinder boot
To brake master cylinder
[Rear]
Brake master cylinder kit
Push rod
Brake master cylinder boot
To brake master cylinder
NOTE:
Apply the brake fluid on the brake master
cylinder kit.
Apply the lithium soap base grease on the tip
of the push rod.
When installing the circlip, use a long nose
circlip pliers.
5 - 17
.
.
.