Quick Test Page; Print Tests; Input Sources - Lexmark 363dn Service Manual

Quick Test page

Print a Quick Test page to verify that the REGISTRATION margin values are set appropriately. The Quick Test
page consists of the following:
•
•
•
•
While the Quick Test page prints, Printing... will display. No buttons are active while the Quick Test page
prints. When the Quick Test page is finished printing, the display returns to the initial REGISTRATION menu
screen.
Note: Print the Quick Test page on Letter- or A4-sized media.

Print tests

This setting tests the printer's ability to generate printed output from each of its installed input sources and to
test the printer's current print quality.

Input sources

PRINT TESTS contains the following installed input sources:
•
•
•
Press or
Single or Continuous is displayed on the screen. A Single test feeds one sheet of media from the selected
input and prints a test page on it. No buttons are active during the Single test. The Continuous test feeds media
from the selected input and prints test pages until
version of the Print Test page in its default resolution. While the Single or Continuous tests print, Printing...
will display. After the Single test prints or the Continuous test is canceled, the display returns to the PRINT
TESTS menu screen.
Note: The type of media installed in the selected input source will affect the contents of the page.
Print Quality Pages (Prt Quality Pgs)
This setting reports the values of a broad range of printer settings and tests the printer's ability to generate
acceptable printed output. Press
started, the printing cannot be canceled and no buttons are active until the printing completes.
Alignment diamonds
Horizontal lines used for skew adjustment
General device information (current page count, installed memory, etc.)
The printer's serial number, code levels, and print registration settings
Tray1
Manual Feeder
MP Feeder
to scroll through the PRINT TESTS menu, and then press
to print the report. Printing Quality Test Pages will display. Once
to select the desired input source.
is pressed. The printer always generates a simplexed
7013-XXX
3-5
Diagnostic aids