Lexmark 363dn Service Manual page 93

Diagnostics mode tests (continued)
BASE SENSOR TEST
Front Door
Input
Fuser Exit
Standard Bin
DEVICE TESTS
Flash Test
PRINTER SETUP
Defaults
Perm Page Count
Serial Number
Engine Setting 1 through 4
Model Name
Configuration ID
Edge to Edge
Enable Edge to Edge Copy
EP SETUP
EP Defaults
Fuser Temp
Transfer Adjust
Print Contrast
Charge Roll
Gap Adjust
Auto Dark Adj
REPORTS
Main Settings Page
EVENT LOG
Display Log
Print Log
Clear Log
Scanner Tests
ASIC Test
Feed test
Sensor Test
EXIT DIAGNOSTICS
See "Base Sensor Test" on page
See "Printer Setup" on page
See "Defaults" on page 3-12.
See "Page Counts" on page
See "Serial Number" on page
"Model Name" on page
See
See "Configuration ID" on page
"Enable Edge to Edge Copy" on page
See
See "EP Defaults" on page
See "Fuser Temperature (Fuser Temp)" on page
See "Transfer" on page 3-14.
"Print Contrast" on page
See
"Charge Roll" on page
See
"Gap Adjust" on page
See
"Automatic Darkness Adjustment (Auto Dark Adj)" on page
See
See "Main Settings Page" on page
See "Display Log" on page
"Print Log" on page
See
"Clear Log" on page
See
"ASIC Test" on page
See
See "Feed Test" on page
See "Sensor Test" on page
This selection exits Diagnostics mode, and Resetting the Printer
displays. The printer performs a POR and returns to normal mode.
3-12.
3-12.
3-12.
3-13.
3-13.
3-13.
3-14.
3-14.
3-14.
3-14.
3-14.
3-14.
3-15.
3-15.
3-16.
3-16.
3-17.
3-17.
3-17.
7013-XXX
3-15.
3-3
Diagnostic aids