Wear Strip (550-Sheet Tray 2) Removal - Lexmark 363dn Service Manual

7013-XXX

Wear strip (550-sheet tray 2) removal

1.
Use a spring hook to disconnect the strip from the top of the tray.
2.
Life the strip, and remove.
Note: When replacing the strip (for all trays):
•
Carefully insert the strip from the top of the tray, and push it down through the opening until it clicks
into place.
•
Turn the tray over to view the bottom of the strip. Using the spring hook, check to make sure that the
end of the strip is fastened tightly.
•
Be sure that the drafted edge of the strip is installed toward the bottom of the tray.
4-80
Service Manual