Input Stereo Sync; Stereo Swapped Fields - Barco Galaxy NH-12 User Manual

The input balance settings are stored in the image file, each source has its own input balance.
7.4.6

Input stereo sync

What can be done?
This menu allows different settings on the incoming stereo sync signal to allow the perfect match with the Image Generator or PC.
With Swapped Fields we can swap the left and right fields of the stereo image at the input stage i.e. the left field will be processed
in the projector as left field or as right field and the right field processed as left field or right field.
Field 1 (Left)
Left
Stereo Sync
Right
Left
Stereo Sync
Right
Image 7-37
Stereo Swapped fields
It is also possible to select only field 1 or only field 2 This will, of course, remove the stereoscopic effect in the projected image.
The swap field function acts at the input while the Invert Stereo (see Display setup) acts on the stereo emitter
output.
How to swap the fields ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Input stereo sync
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Swapped Fields
R59770122 BARCO GALAXY NH-12 04/05/2011
Field 2 (Right)
Normal
Swapped fields
Field 1 (Left)
t
7. Advanced
75