Connecting An Rgb Signal; Input/Output Layers - Barco Galaxy NH-12 User Manual

4. Installation
Image 4-15

Input/output layers

Layer 2,3,4,5 are fixed i.e. they may only be fitted with the boards mentioned above.
The system section
The bottom system section holds :
• Ethernet RJ45 connection
• DVI desktop input
• LCD display
4.5.3

Connecting an RGB signal

How to connect an RGB signal ?
1. Connect the BNC connectors to the projector's RGB input
24
R / PR R / PR R / PR G / Y G / Y G / Y B / PB Hs / Cs Hs / Cs Hs / Cs Vs
B / PB B / PB Vs Vs
DVI DVI DVI COMPUTER COMPUTER COMPUTER
IN1 IN1 IN1 IN2 IN2 IN2 IN1 IN1 IN1 IN2 IN2 IN2 IN1 IN1 IN1 IN2 IN2 IN2
L1 L1 L1 L2 L2 L2 L3 L3 L3
STEREO INPUT STEREO INPUT STEREO INPUT
RS 232 C RS 232 C RS 232 C DVI DVI DVI
DESKTOP INPUT DESKTOP INPUT DESKTOP INPUT
LAYER1
LAYER2
VIDEO VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO
LAYER3
LAYER4
STEREO OUTPUT STEREO OUTPUT STEREO OUTPUT
LAYER5
R.C. R.C. R.C.
R59770122 BARCO GALAXY NH-12 04/05/2011