7. Advanced
Image 7-130
5. Press ENTER to activate the Freeze function
The image can also be frozen using the FREEZE key on the RCU
7.8.4
Standby Timer
What can be done ?
If there is no signal, and the standby timer is enabled, a dialog box is displayed and the projector will shut down after a pre determined
time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Standby Timer
Image 7-131
5. Press ENTER
A dialog box is displayed
Image 7-132
6. Use ↑ or ↓ to select the radio button Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown time
9. Press MENU or BACK to exit or to go back to the previous menu
124
R59770122 BARCO GALAXY NH-12 04/05/2011