Calibration For The Infitec Mode (On One Projector) - Barco Galaxy NH-12 User Manual

Image 7-159
The common color values are automatically calculated based on the measured values of both projectors and these calculated
values are put in the Desired values of both projectors. Both projectors will now operate within the same color gamut.
Link Set can only be performed if the linked CLO has been enabled, see Linked Projectors.
7.9.7.4.4 Calibration for the Infitec mode (on one projector)
What has to be done ?
The projector uses 2 different color filters when operating in (active) Infitec stereo mode. The image displayed is reddish for Infitec
A and greenish for Infitec B.
Dynacolor allows to match also these 2 color gamuts in order to obtain a common color gamut for the left and right (eye) image.
The procedure is similar as for the standard mode but acts on the projector itself.
C
AUTION
values will not guarantee optimal image reproduction.
R59770122 BARCO GALAXY NH-12 04/05/2011
:
Only to be done by qualified personnel ! Never change the values if not needed. Altered color
7. Advanced
143