Lamp Power Mode; Lamp) Mode Settings - Barco Galaxy NH-12 User Manual

7. Advanced
How to set the lamp runtime warning ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lamps menu
4. Use ↑ or ↓ to select Runtime warning...
Image 7-117
5. Press ENTER
A dialog box is displayed
Image 7-118
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
7.7.4

Lamp Power Mode

What can be done?
The Lamp can be set to the normal or economic mode.
Following Mode Settings are available:
NORMAL
ECONOMIC
Table 7-6

(Lamp) Mode Settings

Economic mode is not available in Galaxy NW-7.
CLO is not possible in the economic mode
How to set the lamp power mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Lamp Power Mode
5. Press → to Pull down the menu
6. Use ↑ or ↓ to select Normal/Economic
118
Normal Light Output
Reduced Light Output
R59770122 BARCO GALAXY NH-12 04/05/2011