7. Advanced
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Mode
7. Press → to open the menu
8. Use ↑ or ↓ to select ON
Image 7-154
9. Press ENTER
A white bullet indicates the active setting
7.9.7.3
DynaColor sets
What can be done ?
2 sets of Dynacolor adjustments can be defined and selected. In the following procedures we will only use set1.
How to select a Dynacolor set ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Active Set
7. Press → to open the menu
8. Use ↑ or ↓ to select for example Set1
138
R59770122 BARCO GALAXY NH-12 04/05/2011