Sharpness - Barco Galaxy NH-12 User Manual

Image 7-100
The Transport Delay dialog box will be displayed.
Image 7-101
3. Push the cursor key ↑ or ↓ to select the radio buttons
4. Press ENTER to check the desired radio button
5. Press BACK to return to the Geometry Edit menu.
How to adjust the Transport Delay manually?
1. Display the Transport Delay dialog box (see procedure above)
Image 7-102
2. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the value of the Transport
Delay.
Note: The Transport Delay is by default set to 200.
The Transport Delay Range can be set from 0 to 1023.
Tip: When the transport delay needs to be adjusted In a multi channel setup, first adjust the transport delay of all projectors
one by one, leave the projector with the maximum value, then set all other projectors to this maximum value.
3. Press BACK to return to the Geometry Edit menu.
7.6.6.8

Sharpness

What can be done ?
In some extreme warping conditions digital noise may appear in the warped regions. The sharpness adjustment in the Geometry
menu allows to get rid of these perturbations.
R59770122 BARCO GALAXY NH-12 04/05/2011
7. Advanced
109