Change Password - Barco Galaxy NH-12 User Manual

5. Setup
C
AUTION
precautions
Make sure that the projector (or the operators!) will not be affected by altered environmental conditions when
restarting at power resume.
Unless it is required, it is advised to leave this setting OFF.
How to enable/disable the Automatic startup?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Automatic startup
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable/disable the automatic startup
Image 5-19
7. Press ENTER
5.8.3

Change password

What can be done ?
The password used to access the advanced (More...) items can be reprogrammed.
How to change the password ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Change password...
50
:
If the Automatic startup function is enabled one must be aware of the fact that it involves safety
R59770122 BARCO GALAXY NH-12 04/05/2011