Choosing Dynacolor Sets - Barco Galaxy NH-12 User Manual

Factory Preset
Calibration
Default Desired
Image 7-153
7.9.7.2

Choosing DynaColor sets

Choosing DynaColor set can be done by the operator.
R59770122 BARCO GALAXY NH-12 20/01/2015
Sets the measured parameters back to the factory preset for the current set
This starts the calibration procedure for the measured points of the current set (Changing these
settings may seriously affect the performance of the projector).
This will reset the desired parameters to no color change values (measured values). This can be
interesting to recalculate the secondary colors.
7. Advanced
137